The Tramex Concrete Encounter CME4 for measuring moisture content instantly in concrete floors and floor screeds without the need to drill or damage the surface.
SCREEDS AND CONCRETE FLOORS MUST BE DRY BEFORE THE FLOOR COVERING IS INSTALLED!
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering.
Excess moisture in the concrete could cause latent problems such as condensation or failure of the adhesive under the floor covering.
The Concrete Encounter CME4 will give you an instant reading of moisture content to over 6% for Concrete and 0 to 4 CM (Carbide Method) scale, enabling you to make an informed decision on when to install the floor covering.
To use, simply switch on and press down the instrument firmly against the surface. Carry out unlimited non-destructive tests in seconds without the need to drill or damage the concrete.
Co-planer electrodes on the base of the Concrete Encounter CME4 transmit parallel low frequency signals calibrated to give average moisture content by comparing the change in impedance between damp and acceptably dry concrete.
|Size||150 x 85 x 38mm|
|Power||9 Volt PP3 battery|
|Measuring Range||0 to 6% moisture content for concrete|
|0 to 4cm (carbide method) scale|
|0 to 100 reference scale|