Schonstedt XTPC82-HCPipe & Cable Locator, 82kHz with Arrows, Depth, Sonde & 50/60 Hz passive

Standard Equipment

• Retractable Receiver
• Transmitter with NiMH rechargeable battery pack
• Transmitter battery charger for 120VAC or 12 VDC
• Standard size conductive clip assembly, with 6' leads
• Stainless Steel ground stake
• Tool belt with receiver holster and accessory pouch
• Duffel carryall bag

Accessories

• Three sizes of inductive clamps: 3", 5", or 7"
• Three sizes of conductive clips:
  Standard, Heavy Duty, and Large Heavy Duty
• 82 kHz sonde
• Inductive antenna
• Earphones
• Duffel carryall bag

Specifications

Receiver
Operating Frequency	82kHz or 33kHz (factory selectable) plus 50/60Hz passive detection
Battery	9 V single battery
Battery Life	18 hrs intermittent use
LCD Display	3 1/2 digit reflective Signal Strength, Mode, Directional Arrows, Battery Status, Volume and Depth
Controls	ON/Volume adjustment OFF DEPTH SONDE AUTO GAIN UP gain DOWN gain PASSIVE
Dimensions	Unit extended: 26 in (~66 cm) Unit collapsed: 15.5 in (~39 cm)
Weight	Under 2.5 Lbs
Transmitter
Operating Frequency	82kHz or 33kHz (factory selectable)
Dimensions	7.2" L x 2.2" W x 1.5" H
Battery Type	Rechargeable NiMH 7.2 V, 3800mAH
Battery Life	8 hours continuous use
Charging	12 V DC and 120 V AC charger
Output Power	Maximum allowed under FCC at 82kHz
Controls	ON/OFF UP Power DOWN Power
LCD	3 1/2 digit reflective Battery Status, Mode, Output Power Level, Output Current (mA)
Outputs	8-pin "Smart" CNC connector to: 1) Inductive antenna 2) Inductive clamp(s) 3) Conductive clips 4) Battery charger
Weight	Under 2 lbs