Tramex MRH III Moisture and Humidity Meter

The Tramex MRHIII moisture and humidity meter is a pocket-sized, non-destructive, digital, hand-held, electronic impendence moisture meter. Incorporating 3 modes of operation, this is the complete instrument for moisture and humidity testing. Suitable for water damage, flooring, restoration, indoor air quality, pest control, home inspection.

Features:

• Digital, non-destructive moisture meter
• Specific gravity adjustment for most wood species
• Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface
• External rubber electrodes make direct contact with the material being tested for best sensitivity and repeatability
• Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials
• Large, clear, easy to read display
• Hold function enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible
• Switch-able "On" or "Off" when not in use
• Automatic power cut-off switches "Off" when not in use
• Automatic default to last user setting when switched back on
• Battery opearated (Batteries included)

Tramex MRH III Moisture and Humidity Meter, pdf brochure

Optional: Tramex Hygro-i2 Probe & Tramex Hygro-i2 Electronic Interface Cable to suit MRHIII

Features:

- Fast acclimation time

- Reusable Hygro-i2® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test

- Best in class accuracy, even at high RH >90%

- Proven robustness, durability and reliability

- Accurate, durable and best in class

- Testing per ASTM F2170, giving in situ relative humidity and ambient RH, temperature, dew point

  temperature & grains per pound

- Relative Humidity range: 0% to 100%

- Fastest Temperature response time

- Best temperature accuracy of +/-0ºC to 90 ºC

- Temperature Range: -40°C to 80°C

The Hygro-i2® probe provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete ?ooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display.

The Hygro-i2® probes are reusable, paying for themselves after a few uses compared to single-use, disposable RH probes. Calibration checks can be carried out using the calibration check salts.

Relative Humidity Sensor Specifications: Range: 0 to 100%RH Accuracy: 0% to 99%RH ±2.0%RH (@ 25ºC) Resolution: 0.1% over the complete range Drift: <0.25%RH per year
Temperature Sensor Specifications: Range: -40ºC to 125ºC Accuracy: ±0.1ºC Range 20°C to 60°C (±0.1 °C) Sensor Protection: PTFE Film protects sensor opening from water & dust Drift: <0.04ºF (0.03ºC) per year NIST traceable. (National Institute of Standards and Technology)
The RHIE2 Electronic Interface cable connects the Hygro-i2® RH probes to the MRH3.